enphase IQ7 Installation And Operation Manual page 37

Total harmonic distortion
Ambient temperature range
Night tare loss
Storage temperature range
Compatibility
Dimensions not including mounting bracket
Connector type
Weight
Environmental category/UV exposure rating
Torque specifications for fasteners (Do not over
torque)
Cooling
Relative humidity range
Approved for wet locations
Pollution degree
Communication
Standard warranty term
Compliance
Grounding
Monitoring
Integrated DC disconnect
Integrated AC disconnect
12 Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
37
IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
Features and specifications
© 2023 Enphase Energy Inc. All rights reserved.
%
-40
°C
mW
-40
°C
Pairs with 96-cell PV modules
212 mm x 175 mm x 30.2 mm (approximate)
MC-4 (or Amphenol H4 UTX with additional Q-
DCC-5 adaptor)
1.08 kg (2.38 lbs.)
IP67/outdoor
• 6 mm mounting hardware: 5 N m
• 8 mm mounting hardware: 9 N m
• When using earthing hardware, use the
manufacturer's recommended torque value
Natural convection - no fans
4% to 100% condensing
Yes
PD3
Power line
enphase.com/warranty
AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN
62109-1, IEC/EN 62109-2
The DC circuit meets the requirements for
ungrounded PV arrays. Ground fault protection
(GFP) is integrated into the class II double-
insulated microinverter.
Enphase Installer Portal monitoring options
require an Enphase IQ Gateway
The DC connector has been evaluated and
approved for use as the load-break disconnect.
The AC connector has been evaluated and
approved for use as the load-break disconnect.
5
65
50
85
August 2023
USM-00003-1.0