enphase IQ7 Installation And Operation Manual page 36

Peak power tracking voltage
Operating voltage range
Maximum input DC voltage
Minimum/maximum start voltage
Maximum DC input short circuit current (module lsc)
Overvoltage class DC port
DC Port backfeed under single fault
PV array configuration
Maximum continuous AC output power (-40°C to
65°C)
Peak output power
Power factor (adjustable)
Nominal AC output voltage range
phase)
Nominal output current 230 VAC (single
Nominal frequency
Extended frequency range
Maximum AC output over current protection device
Overvoltage class AC port
AC port backfeed under single fault
Power factor setting
10 No enforced DC/AC ratio. See the compatibility calculator at
11 Nominal voltage range can be extended if required by the utility.
Maximum microinverters per 20 A (max) AC branch
12
circuit 230 VAC (single-phase)
EN 50530 (EU) weighted efficiency 230 VAC (single-
phase)
Static MPPT efficiency (weighted, ref EN 50530)
36
IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
IQ7X-96-2-INT Microinverter parameters
AC parameters
230 VAC (single-
11
-
phase)
module-compatibility
IQ7X-96-2-INT Microinverter
Miscellaneous parameters
© 2023 Enphase Energy Inc. All rights reserved.
V 53
V 25
V
V 33
A
A
1x1 ungrounded array; No additional DC side
protection required; AC side protection requires
max 20 A per branch circuit
VA
VA
0.8 leading
0.8 lagging
Vrms
184
Arms
Hz
Hz 45
A
A
parameters
12 (single-phase)
36 (multi-phase)
%
%
64
79.5
79.5
79.5
10315
II
0
315
320
276
1.37
50
55
20
III
0
1.0
96.5
99.5
August 2023
USM-00003-1.0