enphase IQ7 Installation And Operation Manual page 30

Nominal AC output voltage range
230 VAC (single-phase)
Nominal output current
230 VAC (single-phase)
Nominal frequency
Extended frequency range
Overvoltage class AC port
AC port backfeed under single fault
Power factor setting
1 No enforced DC/AC ratio. See the compatibility calculator at
2 Nominal Voltage Range can be extended if required by the utility.
Maximum microinverters per 20 A (max) AC branch
3
circuit 230 VAC (single-phase)
EN 50530 (EU) weighted efficiency
230 VAC (single-phase)
Static MPPT efficiency (weighted, ref EN 50530)
Total harmonic distortion
Ambient temperature range
Night tare loss
Storage temperature range
Compatibility
Dimensions not including mounting bracket
Connector type
Weight
Environmental category/UV exposure rating
Torque specifications for fasteners (Do not over
torque)
30
IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
Enphase IQ7-60-2-INT Microinverter parameters
2
module-compatibility
Enphase IQ7-60-2-INT Microinverter parameters
Miscellaneous parameters
Features and specifications
© 2023 Enphase Energy Inc. All rights reserved.
0.8 lagging
Vrms 184
Arms
Hz
Hz 45
A
16 (single-phase)
48 (multi-phase)
%
%
%
-40
°C
mW
-40
°C
Pairs with most 60-cell and 72-cell PV modules
212 mm x 175 mm x 30.2 mm (approximate)
MC-4 (or Amphenol H4 UTX with additional Q-
DCC-5 adaptor)
1.08 kg (2.38 lbs.)
IP67/outdoor
• 6 mm mounting hardware: 5 N m
• 8 mm mounting hardware: 9 N m
• When using earthing hardware, use the
manufacturer's recommended torque value
276
1.04
50
55
III
0
1.0
96.5
99.5
5
65
50
85
August 2023
USM-00003-1.0