installation - general
Framing Dimensions
Warning: The fireplace is non-load bearing.
Framing may be constructed of combustible material (i.e. 2 x 4 or 2 x 6) and does not require steel studs.
Framing
Description
Dimensions
A
Framing height
B*
Framing width
C
Finished floor or hearth
D
Framing depth
Minimum height to combustibles
E
F
Minimum height to flue centerline
measured from base of appliance
*Ensure that the wood base for the appliance is strong enough to support its shipping weight of 617 pounds (280 kg).
• Framing may be constructed of combustible material (i.e. 2 x 4 or 2 x 6) and does not require steel studs.
• This appliance must be installed on a solid surface such as a plywood floor which must be the full width and depth of the appliance.
• A combined minimum of 180 square inches of open area for the bench installation and 120 square inches for the flush installation is required for the
convection air outlet to cool the enclosure. Ensure clearances for convection air outlets are met.
• See clearances in this manual for different ways to achieve this.
38
| City Series CP60E
CP60E
For 2" x 4": 45-1/8" (1146 mm)
For 2" x 6": 52" (1321 mm)
74-3/4" (1899 mm)
22-1/4" (565 mm)
BENCH: 52" (1321 mm)
FLUSH: 81-1/4" (2064 mm)
46-1/4" (1175 mm)
E
3RD ANGLE
PROJECTION
DO NOT SCALE
A
B
TOLERANCES UNLESS
FIREPLACE PRODUCTS
OTHERWISE STATED
INTERNATIONAL
DIMENSIONS
0.000 = 0.01 CRITICAL
1:24
SCALE:
0.000 = SPECIFIED TOLERANCE
D
-
MAT'L :
SHEAR/ PUNCH
PROCESS :
CP60 Framing
PART :