Table of Contents
Advertisement
Safety
PACE adheres to the following Heading Guidelines (based on OSHA guidelines) when listing special
information or precautions to be taken. Especially important are all procedures and practices which, if not
strictly observed, could result in injury or loss of life. These "NOTES", "CAUTIONS","WARNINGS" and
"DANGERS" are inserted in this manual whenever deemed necessary. They appear in a blocked off form
with double outline and a shaded background to highlight the information as shown below.
"NOTE"
Used to indicate a statement of company recommendation or policy. The message may relate
directly or indirectly to the safety of personnel or protection of property. NOTE is not associated
directly with a hazard or hazardous situation and is not used in place of "CAUTION", "WARNING"
or "DANGER".
"CAUTION"
Used to indicate a hazardous situation, which may result in minor or moderate injury. May also be
used to alert personnel to conditions, procedures and practices which, if not observed, could
result in damage to or destruction of the product or other equipment.
"WARNING"
Used to define additional information that if not closely followed might result in serious damage to
equipment and represent a potential for serious personnel injury.
"DANGER"
Defines additional information that if not closely followed might result in severe personnel injury or
death. Danger is not used for property damage unless personal injury risk is present.
Usage Warnings/Cautions
WARNINGS
1. A fire hazard may arise if the MBT 350 is used improperly.
2. Do not use the MBT 350 in the presence of an explosive atmosphere.
3. Be careful when using the MBT 350 in places where there are combustible materials.
Heat may be conducted to combustible materials, which are out of sight.
4. Do not apply heat from the MBT 350 to one place for a long time.
5. Do not leave the MBT 350 unattended while powered on.
©2005 PACE Inc., Annapolis Junction, Maryland All Rights Reserved
NOTE
Page 8 of 19
Advertisement
Table of Contents
