Spectra Logic Spectra RXT Media Troubleshooting Manual page 10

Holding the Load/Unload Button
Hold down the Load/Unload button (Figure 2-2) for approximately 15 seconds.
Note: This action causes the drive to reboot, which in turn causes a
forced eject. As a result of the reboot process, the host temporarily
loses contact with the drive.
Figure 2-2
The Load/Unload button.
If this operation is not successful, proceed to Using an Allen Wrench for Manual Eject
on page 11.
Chapter 2. Troubleshooting the RXT150
10
Load/Unload