Tests; Install New Picker - Spectra Logic Spectra 12K Supplementary Manual

Transport tray assembly

Hide thumbs Also See for Spectra 12K:

Table of Contents

Tests

1. Make sure that you are logged in as a Super User.

2. Select Toolbars > Maintenance.

3. Select the Diagnostics icon; the Diagnostics screen displays.

4. From the Diagnostics screen, select Advanced.

5. From the Available tests list, select Install New Picker.

Figure 43 The Diagnostics screen, showing the Available tests menu.

6. Select Prepare Test.

7. From the Diagnostics Configuration window, select Run Test (there are no

parameters for this test).

8. Once the picker has finished running the test, a message will appear reading Install

New Picker Succeeded; select OK to clear this message.

If this message does not appear, proceed as normal.

9. Proceed to Open the Entry/Exit Port on page 32.

Transport Tray Assembly Replacement Guide

Table of Contents

Do you have a question about the Spectra 12K and is the answer not in the manual?

Spectra 64k