Prepare The Library And Host System - Spectra Logic Spectra 12K Supplementary Manual

Prepare the Library and Host System

Shut down the library while keeping the host interface connected to the host system.
1. Disable any backup software that might try to access the library.
Warning:
Electric shock inside the library can cause injury or death.
Disconnect AC power before opening the library door.
2. Turn off the power. The power switch is located at the rear of the library on the
lower left. (It is necessary to unlock and open the rear door of Spectra 64K
libraries.)
3. If necessary, move the library to a location where you have full access to the front
of the library.
Caution:
The library is heavy. Get help when moving the library.
• The Spectra 12K library weighs approximately 210 pounds
(95.25 kg).
• The Spectra 64K library weighs approximately 900 pounds
(408.23 kg).
4. Use the library key to unlock and open the front door of the library.
5. Remove the drives from the drive bay and set them aside in a safe place.
Note:
It is not necessary to remove the media.
6. Proceed to Remove the Robotic Rack Assembly on page 7.
Transport Tray Assembly Replacement Guide
6