Prepare The Library For Tests - Spectra Logic Spectra 64K Supplementary Manual

Prepare the Library for Tests

1. Replace the drives in the drive bay.
2. Close and latch the library door.
3. If necessary, return the library to its normal operating location.
Caution:
The library is heavy. Get help when moving the library.
• The Spectra 12K library weighs approximately 175 lbs.
• The Spectra 64K library weighs approximately 880 lbs.
4. Switch on AC power at the rear of the library. The library initializes and becomes
operational.
Caution:
If the host computer or other equipment was restarted while the
library was out of service, you must exit all programs and shut
down all equipment before reconnecting the library.
5. Proceed to Install New Picker on page 24.
Entry/Exit Port Slider Replacement Guide
23