Analog way SmartMatriX2 User Manual page 44

7.2.10 Service management
7.2.10 Service management
7.2.11 Control management
In this menu, all specific settings, which cannot be sorted under the other menus, are listed:
Network
EDID
Under this section, you can manage the EDID library, and configure the EDID inputs if needed by dragging and
dropping from the EDID Library section to the inputs.
44
In the Service section, you will find the following tools:
IMPORT / EXPORT: Export or locally import the Local Presets, the Thumbnails and
the Shortcuts.
TEMPERATURE and HARDWARE INFO: Provide the status of the FPGA and boards via
alarm tabs.
TECHNICAL SUPPORT: Display the different technical support contacts depending on
your area.
The interface loaded into the unit uses the IP configuration.
Under INTERFACE, you can define a new:
- IP address
- Netmask
- Port: choose the port