Table of Contents
Advertisement
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to "Navigating through the menu" (x page 102) for the operation of the menu screen.
[TEST PATTERN]
Display the test pattern.
Settings such as position and size will not be reflected in test patterns. Make sure to perform various adjustments
while displaying the input image.
1)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
2)
Press as to select the test pattern to display, and press the <ENTER> button.
01
02
03
04
[WINDOW(INVERSION)]
05
[COLOR BAR(VERTICAL)]
06
[COLOR BAR(HORIZONTAL)]
07
[16:9/4:3 ASPECT FRAME]
08
09
[CROSS HATCH]
10
11
[USER TEST PATTERN 1]
12
[USER TEST PATTERN 2]
13
[USER TEST PATTERN 3]
f Selected test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
f To change the test pattern, proceed to Step 3).
3)
Press qw to switch the test pattern.
f The test pattern will switch each time you press qw.
Note
f The [TEST PATTERN] screen (list format, toggle selection format) can be hidden by pressing the <ON SCREEN> button on the remote
control while the test pattern is displayed.
f Thumbnails of [USER TEST PATTERN 1], [USER TEST PATTERN 2], and [USER TEST PATTERN 3] are not displayed.
f The [ALL BLACK] screen is displayed when [USER TEST PATTERN 1], [USER TEST PATTERN 2], or [USER TEST PATTERN 3], in which
a test pattern is not registered in Step 2), is selected and the <ENTER> button is pressed.
f When switching the test pattern by pressing qw in Step 3), [USER TEST PATTERN 1], [USER TEST PATTERN 2], and [USER TEST
PATTERN 3] in which a test pattern is not registered are not displayed.
f Pressing qw while the [TEST PATTERN] menu is selected can also switch the test pattern.
f Perform the image adjustment when the projected image has stabilized.
When using the Zoom Lens (Model No.: ET-D3LEW200) or the Fixed-focus Lens (Model No.: ET-D3LEU100), it is recommended to adjust
the image after at least an hour has elapsed with the focus test pattern displayed.
When using a projection lens other than the Zoom Lens (Model No.: ET-D3LEW200) and the Fixed-focus Lens (Model No.: ET-D3LEU100),
it is recommended to adjust the image after at least 30 minutes have elapsed with the focus test pattern displayed. For details of the test
pattern, refer to "[TEST PATTERN] menu" (x page 210).
To use the active focus optimizer function, set the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE
FOCUS] to [ON], and then adjust the focus. (x page 173)
210 - ENGLISH
Chapter 4 Settings — [TEST PATTERN] menu
[OFF]
[ALL WHITE]
[ALL BLACK]
[WINDOW]
[CIRCLE]
[FOCUS]
Test pattern is not displayed.
Displays the test pattern built-in to the projector.
To change the color of the cross hatch test pattern, refer
to "Changing the color of the cross hatch test pattern"
(x page 211).
Displays the test pattern registered by the user.
For details, refer to "Registering the test pattern" (x page 211).
Advertisement
Table of Contents
