Table of Contents
Advertisement
Blanking correction
Top of the screen
Bottom of the
screen
Left side of the
screen
Right side of the
screen
Note
f The upper limit of the adjustment range may be restricted so that the entire projected image is not covered by blanking width.
f "Geometric & Setup Management Software" can be downloaded from the following website.
https://panasonic.net/cns/projector/pass/
It is necessary to register and login to PASS to download.
[EDGE BLENDING]
The overlapping area is made seamless by creating inclination in the brightness in the overlapped area when
structuring a multi-display screen by combining the projected images from multiple projectors.
Perform the edge blending adjustment when the projected image has stabilized.
When using the Zoom Lens (Model No.: ET-D3LEW200) or the Fixed-focus Lens (Model No.: ET-D3LEU100), it is
recommended to adjust the image after at least an hour has elapsed with the focus test pattern displayed.
When using a projection lens other than the Zoom Lens (Model No.: ET-D3LEW200) and the Fixed-focus Lens
(Model No.: ET-D3LEU100), it is recommended to adjust the image after at least 30 minutes have elapsed with
the focus test pattern displayed. For details of the test pattern, refer to "[TEST PATTERN] menu" (x page 210).
1)
Press as to select [EDGE BLENDING].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[USER]
f Proceed to Step 3) when anything other than [OFF] is selected.
3)
Press the <ENTER> button.
f The [EDGE BLENDING] screen is displayed.
4)
Press as to select [MODE].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[SOFTEDGE/BLACK LEVEL]
Chapter 4 Settings — [ADVANCED MENU] menu
Item
Operation
Press q.
[UPPER]
Press w.
Press w.
[LOWER]
Press q.
Press w.
[LEFT]
Press q.
Press q.
[RIGHT]
Press w.
Sets the edge blending function to off.
Use the setting value preset in the projector for the inclination of the edge blending area.
Use the user-setting value for the inclination of the edge blending area. (Configuration/registration
requires separate software. Consult your dealer.)
Standard setting. Adjusts both the inclination of the brightness and the black level.
Adjustment
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves to the right.
The blanking zone
moves to the left.
The blanking zone
moves to the right.
The blanking zone
moves to the left.
Range of adjustment
Top and bottom 0 - 1198
Left and right 0 - 1918
ENGLISH - 127
Advertisement
Table of Contents
