Table of Contents
Advertisement
3)
Press qw to switch the displayed screen and display [WIRELESS LAN] (page 4/5).
f The QR code is displayed.
Note
f To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model No.: AJ-WM50P) to the
<USB> terminal.
r Displaying the QR code in the information monitor
The following is the operation of the projector when reading the QR code displayed in the information monitor of
the control panel.
1)
Press the <INFO> button on the control panel.
f The top menu screen is displayed.
2)
Press as to select [STATUS].
3)
Press the <ENTER> button.
f The sub-menu item is displayed.
4)
Press as to select [NETWORK].
5)
Press the <ENTER> button.
f The network selection item is displayed.
6)
Press as to select [WIRELESS LAN].
7)
Press the <ENTER> button.
f The detailed item is displayed.
8)
Press as to switch the item to display the QR code.
Note
f Item of the [STATUS] menu → [NETWORK] → [WIRELESS LAN] is not displayed in following cases.
g When the optional Wireless Module (Model No.: AJ-WM50P) is not attached to the <USB> terminal.
g When the [SETUP] menu → [NETWORK] → [WIRELESS LAN] is set to [DISABLE]
r Operation of a smartphone
1)
Start application software of the camera supporting reading of a QR code.
2)
Read the QR code displayed in the OSD or the information monitor with the camera.
3)
Tap the notification displayed on the smartphone screen.
f Tap "Join" or "Connect" if a message to confirm the connection is displayed.
f The smartphone will be connected to the projector via wireless LAN.
Chapter 5 Operations — Network connection
NETWORK STATUS
WIRELESS LAN
SSID
Proj1234_xxxxxxxxxxxxx
KEY
AUTHENTICATION
ENCRYPTION
CHANGE
RETURN
MENU
4/5
********
WPA2-PSK
AES
DISPLAY KEY
ENTER
ENGLISH - 239
Advertisement
Table of Contents
