Table of Contents
Advertisement
18) Press as to select an item, and press qw to adjust the setting.
f Once the adjustment is completed, press the <MENU> button to return to the [BLACK LEVEL ADJUST]
screen.
19) Press as to select [UPPER WIDTH], [LOWER WIDTH], [LEFT WIDTH], or [RIGHT WIDTH] in [BLACK
BORDER AREA].
20) Press qw to set the standard width of [BLACK BORDER AREA].
21) Press as to select [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], or [RIGHT
FREE SHAPE].
22) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 30) when [OFF] is selected.
23) Press the <ENTER> button.
f The [UPPER FREE SHAPE] screen, the [LOWER FREE SHAPE] screen, the [LEFT FREE SHAPE]
screen, or the [RIGHT FREE SHAPE] screen is displayed.
24) Press as to select [ADJUSTMENT POINTS].
25) Press qw to switch the item.
f The items will switch each time you press the button.
[2]
[3]
[5]
[9]
[17]
*1 The points are not placed at equally spaced intervals.
26) Press as to select [EXECUTE].
27) Press the <ENTER> button.
f The projector will go into the adjustment mode.
28) Press asqw to select the adjustment point.
f Move the marker over to the point to adjust.
f Press qw to select the adjustment point when [UPPER FREE SHAPE] or [LOWER FREE SHAPE] is
selected in Step 21).
f Press as to select the adjustment point when [LEFT FREE SHAPE] or [RIGHT FREE SHAPE] is selected
in Step 21).
29) Press asqw to adjust the position of the adjustment point.
f Press as to adjust [VERTICAL] when [UPPER FREE SHAPE] or [LOWER FREE SHAPE] is selected in
Step 21).
f Press qw to adjust [HORIZONTAL] when [LEFT FREE SHAPE] or [RIGHT FREE SHAPE] is selected in
Step 21).
f By adjusting the position of the adjustment point, the border between the adjacent adjustment point will be
interpolated by a straight line.
f To continuously adjust the positions of other adjustment points, return to Step 28).
f Pressing the <MENU> button twice allows to reselect the items for [BLACK BORDER AREA].
30) Press as to select [BLACK BORDER LEVEL].
Chapter 4 Settings — [ADVANCED MENU] menu
Select this item when the shape of the border between [NON-OVERLAPPED BLACK LEVEL] and
[BLACK BORDER LEVEL] is not to be adjusted.
The region of the rectangle with the standard width set in Step 20) will be the [BLACK BORDER
AREA].
Select this item when the shape of the border between [NON-OVERLAPPED BLACK LEVEL] and
[BLACK BORDER LEVEL] is to be adjusted.
Adjusts the shape of the border at points on both ends.
Adjusts the shape of the border at three points
Adjusts the shape of the border at five points
Adjusts the shape of the border at nine points
Adjusts the shape of the border at 17 points
.
*1
.
*1
.
*1
.
*1
ENGLISH - 129
Advertisement
Table of Contents
