Table of Contents
Advertisement
NOTES:
DC cable safety
NOTES:
8
IQ8P Microinverter Installation and Operation Manual
is defective, do not use the IQ Terminator. Do not circumvent or manipulate
the latching mechanism.
When installing the IQ Cable, secure any loose cable to avoid the risk of
cable insulation abrasion against the roof surface.
When looping the IQ Cable, do not form loops smaller than 120 mm in
diameter.
Provide support for the IQ Cable every 300 mm.
If you need to remove IQ Sealing Cap, you must use the IQ Disconnect Tool.
When installing the IQ Cable and accessories, adhere to the following:
•
Do not expose the IQ Terminator cap or cable connections to directed,
pressurized liquid (water jets, etc.).
•
Do not expose the IQ Terminator or IQ Cable to continuous immersion.
•
Do not expose the IQ Terminator cap or IQ Cable connections to
continuous tension (for example, tension due to pulling or bending the
cable near the connection).
•
Use only the compatible Enphase IQ connectors.
•
Do not allow contamination or debris in the connectors.
•
Use the IQ Terminator cap and cable connections only when all parts
are present and intact.
•
Do not install or use in potentially explosive environments.
•
Do not allow the IQ Terminator to come into contact with an open
flame.
•
Fit the IQ Terminator cap using only the prescribed tools and in the
prescribed manner.
•
Use only the IQ Terminator to seal the conductor end of the IQ Cable;
no other method is allowed.
•
Ensure proper routing of PV module DC cable using the clips to prevent
the leads from resting on the roof. Do not wrap excess DC cable around
the microinverter.
•
Avoid direct exposure to sunlight.
•
Avoid sharp edges on racking.
•
Avoid cable contacting rough surfaces or moving parts within the
racking system.
•
Avoid overly tight bending radii. The minimum bend radii for the DC
cable are eight × cable outer diameter.
•
Avoid overly tight-sized cable clips for routing.
© 2023 Enphase Energy Inc. All rights reserved.
September 2023
IOM-00001-1.0
Advertisement
Table of Contents
