Iq Cable Options; Enphase Iq Cable Accessories - enphase IQ8P Installation And Operation Manual

Microinverters
Hide thumbs Also See for IQ8P:
Table of Contents

Advertisement

modules installed in portrait orientation, while the 2.0-meter and 2.3-meter spacing allow you to
install in landscape orientation for PV modules with 54-cell/108-half-cell, 60-cell/120-half-cell, 66-
cell/132-half-cell, 72-cell/144-half-cell configurations.

IQ Cable options

Ordering options include:
Cable model
Single-phase
Q-25-10-240
Q-25-17-240
Q-25-20-200
Multi-phase
Q-25-10-3P-200
Q-25-17-3P-160
Q-25-20-3P-160
The cabling system is flexible enough to adapt to almost any solar design. To determine the cable
type you need, apply the following considerations:
When mixing PV modules in both portrait and landscape orientation, you may
need to transition between cable types. See the preceding table for available
cable types.
To transition between cable types, install a Field Wireable Connector pair.
In situations where portrait modules are widely spaced, you may need to use
landscape-spaced cables for the portrait-oriented PV modules and create loops
of excess cable, if needed.
WARNING: Do not form loops smaller than 120 mm in diameter.

Enphase IQ Cable accessories

The IQ Cable is available with several accessory options for ease of installation, including:
Raw IQ Cable (Q-25-RAW-300 for single-phase, Q-25-RAW-3P-300 for multi-phase): Length
300 meters. Raw cable with no connectors (optional).
IQ Field Wireable Connectors (male and female; single-phase: Q-CONN-R-10M and Q-CONN-R-
10F; multi-phase: Q-CONN-3P-10M and Q-CONN-3P-10F).
IQ Cable Clips: (ET-CLIP-100): Used to fasten cabling to the racking or to secure looped cabling.
IQ Disconnect Tool (Q-DISC-10): Disconnect Tool for IQ Cable connectors, DC connectors, and
AC module mount.
IQ Sealing Cap (female) (Q-SEAL-10): One is needed to cover each unused connector on the
cabling.
IQ Terminator (Q-TERM-R-10 for single-phase or Q-TERM-3P-10 for multi-phase): One for each
AC cable segment end; typically, two are needed per branch circuit.
IQ Relay: single-phase (Q-RELAY-1P-INT) or multi-phase (Q-RELAY-3P-INT). For the Italy region,
use IQ Relay (Q-RELAY-2-3P-ITA) for both single-phase and multi-phase applications.
26
IQ8P Microinverter Installation and Operation Manual
Connector
spacing
1.3 m
2.0 m
2.3 m
1.3 m
2.0 m
2.3 m
© 2023 Enphase Energy Inc. All rights reserved.
PV module orientation
Portrait
Landscape (60-cell)
Landscape (72-cell)
Portrait
Landscape (60-cell)
Landscape (72-cell)
Connector
count per box
240
240
200
200
160
160
September 2023
IOM-00001-1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq8p-72-2-int

Table of Contents