Reflex Reflexomat Compact RC Series Operating Manual page 42

Controller
This value is only displayed if "YES" has been set in the "With softening" menu option.
• Manufacturer specification for the replacement interval of the softening cartridges,
regardless of the calculated soft water capacity. The system displays the "Softening"
message.
Recommended maintenance messages.
Off: Without maintenance recommendation.
001 – 060: Maintenance recommendation in months.
For the output of messages to the floating contact, see chapter 9.2.2 "Messages" on
page 44 .
Output of all messages.
yes:
Output of all messages identified with "xxx" ("05", for example).
no:
Switch to the "Fault memory" main menu.
• Press "OK" to open the menu.
• Use the "▼▲" buttons to open the sub-menu.
The last 20 alarms are stored with fault type, date, time, and fault code.
See the chapter "Messages" for more information about the ER... messages.
Switch to the "Parameter memory" main menu.
• Press "OK" to open the menu.
• Use the "▼▲" buttons to open the sub-menu.
The last 10 entries of the minimum working pressure are stored with date and time.
The system displays the values for the volume and the diameter of the "RG" primary tank.
• If you identify differences to the information provided on the primary tank's
nameplate, please contact the Reflex Customer Service.
Information about the software version
42 — English Reflexomat with Basic controller — 20.06.2017 - Rev. C
Replacement
18 months
Next maintenance
012 months
Floating fault contact
YES
Fault memory˃
ER 01...xx
Fault type | Date | Time
Parameter memory˃
P0 = xx.x bar
Date | Time
Tank info
00800 l
Reflexomat
V1.00
05