Table of Contents
Advertisement
Exterior lighting
Notes on adjusting the lights when driving abroad
Vehicles with static LED headlamps: Before cross-
ing the border into countries in which traffic
drives on the other side of the road, it is neces-
sary to convert the headlamps to symmetrical low
beam (
page 202).
/
Once the headlamps have been converted:
Oncoming traffic will not be dazzled.
R
The edge of the road will not be illuminated as
R
far or as high.
The headlamps must be reset to asymmetrical low
beam when you return from abroad.
Vehicles with Intelligent Light System: As a conve-
nience function, the headlamps will automatically
switch when you cross the border into countries
where traffic drives on the other side of the road.
If necessary, the headlamps can also be adjusted
manually on the
Low beam
menu (
The automatic light adjustment function is availa-
ble:
If automatic is selected on the
R
menu
If the navigation and the navigation position
R
are available
In the following cases, check the headlamp set-
ting and change it manually if necessary:
Low beam setting (left/right-side traf-
If the
R
fic) Manual adjustment only
is displayed.
If the
Check low beam setting (left/right-
R
side traffic)
Following manual adjustment:
Oncoming traffic will not be dazzled.
R
The edge of the road will not be illuminated as
R
far or as high.
The "motorway mode" and "enhanced fog
R
page 202).
/
light" functions will not be available.
Low beam
display message
display message is displayed.
F232 0017 02
Light and sight 191
Information about lighting systems and your
responsibility
The various lighting systems of the vehicle are
only aids. The driver of the vehicle is responsible
for correct vehicle illumination in accordance with
the prevailing light and visibility conditions, legal
requirements and traffic situation.
Advertisement
Table of Contents
