Mercedes-Benz Mercedes-AMG SL Roadster 2023 Operator's Manual page 443

To select a recording mode: select
#
recording or Individual recording.
Loop recording records several short video
files. When the memory is full, recording is
continued automatically. In doing so, other
files will be overwritten starting with the oldest
file.
Individual recording stops recording when the
memory limit is reached. An individual record-
ing is automatically protected against being
overwritten.
To start: select Start recording.
#
The length of the recording is shown. The
not remove the storage medium during
recording. Before removing the storage
medium, eject it first. message appears. The
video file is stored on the USB device.
To end: select End recording.
#
%
In some countries, geo-coordinates (longitude
and latitude) are shown in the video image.
For technical reasons, the geo-coordinates
may show greater inaccuracies.
Loop A report may appear in the following cases:
Individual recording: the memory is full or
R
there are only a few minutes recording time
available. The video recording stops or will be
stopped imminently.
Change the USB device or delete a video file.
The camera is not functional, the
R
unavailable message appears.
Have the camera checked in a Mercedes-Benz
service centre.
If the country border indication has been
R
switched on (
Do
If an outdoor recording is started with the
R
camera app during a dashcam recording, the
dashcam recording pauses and resumes auto-
matically after the camera recording is fin-
ished. A notification to this effect is displayed.
▌Configuring dashcam settings
Requirements:
A USB device is connected with the multime-
R
dia system (
/
Camera
page 441).
/
page 497).
F232 0017 02
MBUX multimedia system 441
Multimedia system:
© Apps Dashcam
4 5 5
Select Z.
#
Receiving notifications after passing a border
crossing
Switch on National border alert
#
A message is shown if video is being recorded
and the vehicle passes a border.
%
This function is not available in all countries.
Starting automatic video recording
Select Automatic loop recording.
#
Switch on Automatic loop recording.
#
When the vehicle is started, video recording
starts automatically.
%
This function is not available in all countries.
.