Table of Contents
Advertisement
146 Opening and closing
1
Press closing button
on the boot lid.
#
Vehicles with KEYLESS-GO
Press locking button
2
on the boot lid.
#
If a key is detected outside the vehicle, the
boot lid will close and the vehicle will be
locked.
%
Vehicles with Digital Vehicle Key: this also
applies to the Digital Vehicle Key if the func-
tion is activated and the Digital Vehicle Key is
connected to the vehicle.
With the boot lid completely open, press and
#
hold the H button on the key. The key must
be in the vicinity of the vehicle.
Vehicles with HANDS-FREE ACCESS
With the boot lid completely open, make a
#
kicking movement with your foot below the
bumper (
page 147).
/
Boot lid automatic reversing function
The boot lid is equipped with automatic blockage
detection with a reversing function. If an obstacle
obstructs the boot lid during the automatic clos-
ing process, it will automatically open again. The
automatic reversing function is only an aid and is
not a substitute for your attentiveness.
During the closing process, make sure that no
#
body parts are in the closing area.
F232 0017 02
& WARNING Risk of becoming trapped
despite reversing function
The reversing function will not react:
to soft, light and thin objects, e.g. fingers
R
towards the end of the closing procedure
R
In these situations in particular, the reversing
function cannot prevent someone being trap-
ped.
Ensure that no body parts are in the
#
closing area.
If someone is trapped, use one of the fol-
#
lowing options:
Press the H button on the key.
R
Press the remote operating switch on
R
the driver's door.
Press the closing or locking button
R
on the boot lid.
Pull the boot lid handle.
R
Advertisement
Table of Contents
