Table of Contents
Advertisement
40
Quick start and Tips
Press the wiper blade onto the wiper arm
#
beyond the point of resistance in the direction
of arrow 3.
The wiper blade will engage with a noticeable
click and move freely again.
Fold the wiper arm back onto the windscreen.
#
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Replacing the windscreen wiper blades
& WARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windscreen wipers
#
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
Switch the vehicle on and then off again
#
immediately.
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
The wiper arms will move into the replacement
position.
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Observe the information about the service
#
indicator.
F232 0017 02
Service indicator
page 205).
/
Remove protective film
#
indicators on the tips of the newly fitted wiper
blades.
When the colour of the service indicators changes
from black to yellow, replace the wiper blades.
%
The time until the colour changes varies
depending on the usage conditions.
1
from the service
Advertisement
Table of Contents
