Table of Contents
Advertisement
assist you with parking and Manoeuvering. For
this purpose, your vehicle uses cameras and ultra-
sonic sensors to monitor the area around the
vehicle.
Depending on the equipment level, the following
systems and functions are part of your Parking
Package:
Reversing camera: monitors the area to the
#
rear of the vehicle and displays this in the
driver display (
page 314).
/
360° Camera: a system that consists of four
#
cameras which cover the immediate surround-
ings of the vehicle and display this in the
driver display (
page 316).
/
Parking Assist PARKTRONIC: an electronic
#
parking assistance system which monitors the
area surrounding your vehicle and the dis-
tance to obstacles in the vicinity using ultra-
sound (
page 321).
/
Active Parking Assist: is an electronic parking
#
assistance system which assists you when
parking or leaving a parking space by chang-
ing gears, accelerating, braking and steering
the vehicle (
page 325).
/
Memory Parking Assist: can park your vehicle
#
in and leave a previously recorded and stored
parking space (
page 334).
/
Destination entry navigation
Entering a navigation destination
Briefly press © on the multimedia system
#
display.
The zero layer is shown.
Select ª.
#
Select the following options for destination entry:
Enter a POI, an address or a three-word
R
address in the input line.
Online search results for POIs (if available)
may contain additional information, for exam-
ple opening times and prices. The information
is provided by an online map service.
You can find further information about 3 word
addresses at: http://+what3words.com
Select a destination suggestion.
R
Requirements:
F232 0017 02
Quick start and Tips
The
Navigation
option is switched on in the
user settings for Suggestions.
The multimedia system has gathered sufficient
data in order to show destination suggestions.
Select
Previous
destinations.
R
Select a previous destination.
You can save the destination as a favourite .
Select POIs.
R
Select a POI category, e.g. j or enter a POI
name or POI category in the input line.
If search results are displayed, limit them with
Filter, for example by search position or the
desired travel time.
Select Contacts.
R
Requirements:
A mobile phone is connected to the multime-
dia system and contacts have been downloa-
ded.
The contact contains a navigable address.
Enter the geocoordinates as latitude and longi-
R
tude in the input line.
13
Advertisement
Table of Contents
