Table of Contents
Advertisement
30
Quick start and Tips
M+S tyres: 4 mm
R
For safety reasons, replace the tyres
#
before the legally-prescribed limit for the
minimum tread depth is reached.
Carry out the following checks on all wheels regu-
larly, at least once a month or as required, for
example, prior to a long journey or driving off-
road:
Check the tyre pressure (
/
R
Visually inspect wheels and tyres for damage.
R
Check the valve caps.
R
Visual check of the tyre tread depth and the
R
tyre contact surface across the entire width.
The minimum tread depth for summer tyres is
3 mm and for winter tyres 4 mm.
Removing the safety vest
The high-visibility waistcoats are located in the
glove compartment when delivered.
Pull out the safety vest bag by the loop.
#
Open the safety vest bag and pull out the
#
safety vest.
page 554).
1
Maximum number of washes
2
Maximum wash temperature
3
Do not bleach
4
Do not iron
5
Do not tumble dry
6
Do not dry clean
7
Class 2 safety vest
The requirements defined by the legal standard
are only fulfilled if the safety vest is the correct
size and is fully closed.
F232 0017 02
Replace the safety vest in the following cases:
The reflective strips are damaged or dirty
R
The maximum permissible number of washes
R
is exceeded
The fluorescence property decreases, e.g. due
R
to permanent exposure to sunlight.
Dispose of the safety vest in an environmentally
friendly way:
Please contact your local waste disposal com-
R
pany.
Removing the warning triangle
Advertisement
Table of Contents
