Table of Contents
Advertisement
If the vehicle is in first position at a traffic light,
the camera image with traffic light view is shown
on the central display.
When the vehicle pulls away, the camera image is
faded out.
Activate D or deactivate E
#
light
view.
Using other available functions
Select Z.
#
Select
On request
or Automatic.
#
If
On request
is set and a traffic light view is
available, the
Please tap here for traffic light
view.
message is displayed. The camera image
is shown after confirmation of the message.
When
Automatic
is set, the camera image is
automatically displayed when the traffic light
view is available.
Blind Spot Assist and Active Blind Spot Assist
▌Function of Blind Spot Assist and Active Blind
Spot Assist with exit warning
Blind Spot Assist and Active Blind Spot Assist use
radar sensors to monitor the area up to 40 m
Traffic
behind and 3 m next to your vehicle.
The system can detect vehicles travelling from
speeds of approximately 12 km/h and issue a
warning if they move into the monitoring range.
Status display in the driver's display
¸ Grey: the system is activated but inopera-
tive.
¸ Green: the system is activated and opera-
tional.
F232 0017 02
Driving and parking 301
Display in the driver's display in the
If a vehicle is detected at speeds above approx-
imately 12 km/h and this vehicle enters the warn-
ing range immediately afterwards, the warning
lamp in the corresponding outside mirror lights up
red. In the
Assistance
menu, the lamp in outside
mirror
1
also lights up red, and the lane in which
the vehicle is detected is hatched out.
If a vehicle is detected in the warning range and
you switch on the turn signal indicator in the cor-
responding direction, a double warning tone
sounds once, and the warning lamp flashes red in
the corresponding outside mirror. Red radar
menuAssistance
Advertisement
Table of Contents
