Table of Contents
Advertisement
A malfunction has occurred in the restraint sys-
tem if:
the 6 restraint system warning lamp does
R
not light up when the vehicle is switched on
the 6 restraint system warning lamp lights
R
up continuously or repeatedly during a journey
If components of the restraint system have been
deployed, the 6 restraint system warning lamp
lights up continuously.
& WARNING Risk of injury due to malfunc-
tions in the restraint system
Components in the restraint system may be
activated unintentionally or not deploy as
intended in an accident.
Have the restraint system checked and
#
repaired immediately at a qualified spe-
cialist workshop.
Mercedes-Benz recommends that you have the
vehicle towed to a qualified specialist workshop.
Function of the seat belt warning lamp
The ü seat belt warning lamp in the driver's
display is a reminder that all vehicle occupants
must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
%
If you are using an ISOFIX or i‑Size child
restraint system on the front passenger seat,
where the child is not secured using the seat
belt of the front passenger seat, the seat belt
warning may be activated in rare cases. In
this case, insert the seat belt tongue into the
seat belt buckle of the front passenger seat.
Guide the seat belt between the ISOFIX or
i‑Size child restraint system and the backrest
of the front passenger seat.
Function of the rear seat belt status display
The rear seat belt status display in the driver's dis-
play is a reminder that all vehicle occupants must
wear their seat belts correctly.
In addition, a warning tone may sound.
F232 0017 02
Occupant safety – Brief overview of most important points
If a person unfastens a seat belt in the rear
passenger compartment while the vehicle is
motion, the rear seat belt status display appears
again.
Display in the driver's display
Every time the vehicle is switched on, the rear
seat belt status display informs you for a certain
amount of time which rear seat belt is not fas-
tened.
You can determine the status of the rear seat belt
by the colour of the seat symbol in the driver's
display as follows:
Grey: the rear seat belt is not fastened.
R
91
Advertisement
Table of Contents
