Installing Secondary Riser Card - NEC EXP805 User Manual

Chapter 2 Preparations

Installing Secondary Riser Card

Please prepare the following before installing the options.

Parts included in the option kit

T-10 hexalobular driver
To install the components, follow these steps.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Unfasten two screws securing the rear blank cover, and pull up the blank cover to remove it.
3. Adjust the position of the riser card edge of the secondary riser card to the position of the connector, and
push it in place from above.
Raise the screw handles located on the upper part of the riser card and push it downwards while turning it
180° to the right to fix the riser card in place. Then, return the screw handles to their original positions.
Note In order to prevent the damage to server's main body or the expansion board,
please remove all the AC power cables before removing/installing riser card.
Note Keep each removed blank covers.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
91