NEC EXP805 User Manual page 39

Chapter 1 General Description
Item
Processor LED
DIMM LED
Cooling fan LED
NIC LED
Power unit LED
Riser Card LED
Overtemperature
LED
AMP status LED
Power Capping LED
When the STATUS LED on the front panel lights in amber or red, it indicates that an event has occurred on the
server. For details, refer to (4) Status LED Panel combined LED descriptions in the next section.
Status
Lights off Normal state
Amber Processor has failed
Lights off Normal state
Amber The DIMM has failed or there is a configuration problem
Lights off Normal state
Amber The cooling fan has failed or is not recognized
Lights off Not linked to the network.
If the NIC LED is off, check the status with LED on the backside
of the unit.
Lights in green Linked to the network
Flashes in green Linked to the network and working in operation
Lights off Normal state
Lights in amber The power subsystem is degraded, the power supply unit has
failed, or the input power is disconnected
Lights off Normal state
Amber Riser card unit is not correctly installed
Lights off Normal state
Amber High temperature detected
Lights off AMP mode disabled
Lights in green AMP mode enabled
Lights in amber Failover
Flashes in amber Invalid configuration
Lights off The system is in standby state, or the upper limit of power
consumption is not set
Lights in green The upper limit of power consumption is applied
Express5800/R120h-2M (2nd-Gen) User's Guide
4. Names and Functions of Parts
Description
39