Lom Card; Installation - NEC EXP805 User Manual
Hide thumbs
Also See for EXP805:
- Maintenance manual (136 pages) ,
- User manual (262 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.19
LOM Card
The server supports LOM Card which is the replaceable onboard network adapter.
Install LOM Card to the LOM Card slot on motherboard. The motherboard has one slot to install LOM Card.
Installation
Please prepare the following before installing the option.
Parts included in the option kit
T-10 hexalobular driver
To install the components, follow these steps.
1.
Back up all data in the server.
2.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
Raise two screw handles at the top of the primary riser card and turn them to the left 180 degrees. Then
hold both sides of cage and lift them upright to remove the cage.
4.
Remove the screw of the LOM blank cover and remove the cover.
126
Important
You must avoid static electricity to work with the procedure below. For
details, see Chapter 1 (1.8 Anti-static Measures) in Safety Precautions and
Regulatory Notices.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
