Installing Secondary Riser Card - NEC Express5800/R120h-2M User Manual

Chapter 2 Preparations

Installing Secondary Riser Card

Please prepare the following before installing the options.

Parts included in the option kit

T-10 hexalobular driver
To install the components, follow these steps.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Unfasten two screws securing the rear blank cover, and pull up the blank cover to remove it.
Note In order to prevent the damage to server's main body or the expansion board,
please remove all the AC power cables before removing/installing riser card.
Note
Keep each removed blank covers.
Express5800/R120h-2M User's Guide
1. Installing Internal Optional Devices
85