NEC EXP805 User Manual page 236

Chapter 3 Setup
Category
Basic Change date and time
Setting up Time Zone
when Time Format is
set to UTC
Memory Use memory RAS
feature
Optional Start the system from
board installed option board.
Boot Set the Boot Mode to
UEFI Mode according
to your OS.
Set the Boot Mode to
Legacy BIOS Mode
according to your OS.
Change [Embedded
SATA Configuration]
according to your
configuration
Change the boot order
of devices
236
Description
Fix the date as follows; System Configuration
> BIOS/Platform Configuration (RBSU) > Date
and Time - Date.
Then, fix the time as follows System
Configuration > BIOS/Platform Configuration
(RBSU) > Date and Time - Time
・If you use the device in Japan
Set System Configuration > BIOS/Platform
Configuration (RBSU) > Date and Time -
Time Zone to UTC+09:00.
Set System Configuration > BIOS/Platform
Configuration (RBSU) > Memory Oprations -
Advanced Memory Protection
Set to Enabled in System Configuration >
BIOS/Platform Configuration (RBSU) > PCIe
Device Configuration > SlotXX – PCIe Option
ROM.
Change System Configuration >
BIOS/Platform Configuration (RBSU) > Boot
Options – Boot Mode to UEFI Mode *1
・The following OSs are applicable.
－ Red Hat Enterprise Linux 7 (x86_64)
－ Windows Server 2012 R2
－ Windows Server 2016
－ Windows Server 2019
－ VMware ESXi6.5
－ VMware ESXi6.7
Change System Configuration >
BIOS/Platform Configuration (RBSU) > Boot
Options – Boot Mode to Legacy BIOS Mode
*1
・If you use the built-in SW RAID controller on
Windows, set [Smart Array SW RAID Support] in
System Configuration > BIOS/Platform
Configuration (RBSU) > Storage Options > SATA
Controller Options.
・If you use Linux, set [Enable SATA AHCI
Support] in System Configuration >
BIOS/Platform Configuration (RBSU) > Storage
Options > SATA Controller Options.
In case Boot Mode is UEFI Mode, change the
boot order in System Configuration > BIOS...
(RBSU) > Boot Options > UEFI Boot Settings -
UEFI boot Oder
In case Boot Mode is Legacy BIOS Mode,
change the boot order in System Configuration
> BIOS... (RBSU) > Boot Options - Legacy
BIOS Boot Order.
Express5800/R120h-2M (2nd-Gen) User's Guide
To be changed
2. Description on System Utility
(2/4)
Remark
The setting can also be
done from the OS.
Some of RAS features may
not be used depending on
DIMM configuration.
XX is PCI slot number of the
installed option board
The setting must be done
in compliance with the
checklist before setup in
the installation guide of
your OS
For Windows: [Chapter 1
Installing Windows]
The setting must be done
in compliance with the
checklist before setup in
the installation guide of
your OS
Do not use [Smart Array
SW RAID Support] on
Linux.
When you use CD/DVD,
set CD/DVD to the
highest priority.