Removal - NEC EXP805 User Manual
Hide thumbs
Also See for EXP805:
- Maintenance manual (136 pages) ,
- User manual (262 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
3.
Position the guide pin of the RAID controller to the connector of the motherboard, firmly insert it from above,
tighten the screws securing it in place.
4.
Connect Front Disc BP and RAID Controller with SAS Cable.
5.
See Chapter 2 (1.33 Attaching the air baffle) to attach the air baffle.
6.
See Chapter 2 (1.34 Installing Top Cover) to attach the top cover of the server.
7.
Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
112
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
