Installing The Tertiary Riser Drive Cage (N8154-95) - NEC EXP805 User Manual

Chapter 2 Preparations
9. See Chapter 2 (1.34 Installing Top Cover) to attach the top cover of the server.
10. Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.

Installing the Tertiary Riser Drive Cage (N8154-95)

Please prepare the following before installing the options.

Parts included in the option kit

T-10 hexalobular driver
To install the components, follow these steps.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. If there is no secondary riser card, unfasten the screws (x2) securing the blank cover, and pull the blank
cover upward to remove it.
Note In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important To prevent personal injury, electrical shock or equipment damage, unplug
the power cord and ensure no power is supplied to the server. You cannot
turn off the system power supply completely by the power button on the
front panel. Until the AC power cord is unplugged, the power supply circuit
is still active in some parts of the machine.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
163