electronic gate open / close - Optional
The OPTIONAL external key switch device (sold separately) can open or close the
gate electronically if the switch has been wired to the MC-200 motor controller.
Insert key on control box, turn and HOLD (in either direction) to MOVE gate.
CAUTION:
Keep pedestrians and vehicles clear of the gate while it is moving.
audible alarm
If the Alarm Sounds During Normal Gate Operation:
TWO consecutive obstructions before completing a gate cycle, the alarm will sound and
the gate will PAUSE in the position where the second obstruction occurred. CHECK THE
GATE AREA FOR ANY PROBLEMS BEFORE pressing the
or the externally mounted
NOTE: Alarm will automatically shut-off after five minutes but will not allow gate to
operate until the STOP button is pressed.
Some reasons why the alarm sounds:
•
HINGES are TOO TIGHT or BROKEN, gate CANNOT move freely.
•
Gate is STUCK or BENT in an awkward position.
•
A FOREIGN OBJECT is on the gate frame while the gate is moving.
•
The gate is TOO HEAVY.
•
The gate operator tries to close the
gate but gate gets CAUGHT on an
object and cannot move.
42
maintenance
Alarm Reset button
to shut off the alarm and reset the gate.
When the gate encounters
STOP button
on the Matrix 1
OUTSIDE Property
Moving Vehicle is Entering
•
The moving gate gets PUSHED by a moving VEHICLE.
E N
O P
Alarm Shut-OFF
MOTOR MOTION
STOP
OPEN
CLOSE
Matrix 1
STOP Button
Externally Mounted
S
Alarm Reset Button
E S
P R
shuts-off alarm.
T
S E
R E
t o
INSIDE Property
Gate is Closing
E
O S
C L
Need help?
Do you have a question about the MAX MEGATRON 1400HP and is the answer not in the manual?
Questions and answers