Air Spring Service; 200 Hour Service; Air Spring Removal - SRAM PIKE RCT3 Service Manual

A i r S p r i n g S e r v i c e
2 0 0 H o u r S e r v i c e
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to do
so can result in injury and/or damage to the fork.
Inspect each part for scratches. Do not scratch any sealing surfaces
when servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove
the seal or o-ring. Spray isopropyl alcohol on each part and clean with
a clean lint-free rag.
Apply SRAM® Butter grease to the new seals and o-rings.
Dual Position Air™: Remove the travel adjuster knob retaining nut.
1
Remove the travel adjuster knob.
A i r S p r i n g R e m o v a l
⚠ WARNI NG- EYE HAZARD
N OTIC E
SRAM Butter
10 mm Dual Position Air
19

Air Spring Service