Air Spring Service - Judy Gold, 30 Gold, Recon Gold; 200 Hour Service; Air Spring Removal And Service - Gold - SRAM Rockshox Judy Series Service Manual

A i r S p r i n g S e r v i c e - J u d y G o l d , 3 0 G o l d , R e c o n G o l d
2 0 0 H o u r S e r v i c e
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to
do so can result in injury and/or damage to the fork.
Inspect each part for scratches. Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove the
seal or o-ring. Spray isopropyl alcohol on each part and clean with a clean
lint-free shop towel.
Apply Liquid-O-Ring PM600 or SRAM Butter grease to the new seals and
o-rings. If a brush is used to apply grease, confirm there are no loose
bristles in the grease or on the part.
1 Remove the air spring top cap.
Clean the upper tube threads.
2 Push the air shaft into the upper tube to prevent it from getting
scratched while removing the retaining ring.
A i r S p r i n g R e m o v a l a n d S e r v i c e - G o l d
⚠ WARNI NG- EYE HAZARD
NOTI CE
PM600
24 mm

Air Spring Service - Judy Gold, 30 Gold, Recon Gold

SRAM Butter
32