Figure 91. Installing the MicroSD card
Next steps
Follow the procedure listed in
Optional IDSDM or vFlash module
Removing the optional IDSDM or vFlash card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see the
2. Holding the pull tab, lift the IDSDM/vFlash card out of the system.
98
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
System board jumpers and connectors
system.
system.
section.