Table of Contents
Advertisement
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 6. System health and system ID indicators
Table 5. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the front panel of your system.
Table 6. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly
and then turns off
12
Dell EMC PowerEdge R540 overview
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the
iDRAC Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Condition
Indicates that the system is turned on, system is healthy, and
system ID mode is not active. Press the system health and
system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see the Getting help section.
Indicates that the system is experiencing a fault. Check the
System Event Log or the LCD panel, if available on the bezel,
for specific error messages.
For more information about error messages, see the Event and
Error Message Reference Guide for 14th Generation Dell EMC
PowerEdge Servers at www.dell.com/qrl.
Corrective action
If the LED fails to turn on, reseat the cable and
check. If the problem persists, see the
help
section.
If the LED fails to turn off, restart the system.
If the problem persists, see the
section.
If the indicator continues to blink indefinitely, see
the
Getting help
If the indicator continues to blink indefinitely, see
the
Getting help
Check if iDRAC Quick Sync 2 feature is
configured to be disabled by iDRAC. If the
problem persists, see the
For more information, see Integrated Dell Remote
Access Controller User's Guide at
poweredgemanuals
Administrator User's Guide at
openmanagemanuals
Administrator.
Getting
Getting help
section.
section.
Getting help
section.
www.dell.com/
or Dell OpenManage Server
www.dell.com/
> OpenManage Server
Advertisement
Table of Contents
