Table of Contents
Advertisement
Figure 128. Removing the system board
Next steps
Installing the system
board.
Installing the system board
Prerequisites
Follow the safety guidelines listed in
Steps
1. Unpack the new system board assembly.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the
chassis.
2. Holding the system board holder, push the system board toward the back of the system until it is seated.
3. Using Phillips #2 screwdriver, tighten the screws to secure the system board to the chassis.
130
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
