View Menu; Locating The Service Tag Of Your System - Dell EMC PowerEdge R450 Xeon 4309Y Installation And Service Manual

Option Description
Set error Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This
enables you to match an LCD message with an SEL entry.
Select Simple to view LCD error messages in a simplified user-friendly description. For information
about the event and error messages generated by the system firmware and agents that monitor system
components, go to
Set home Select the default information to be displayed on the Home screen. See View menu section for the
options and option items that can be set as the default on the Home screen.

View menu

NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.
Option Description
iDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and Secondary),
Gateway, IP, and Subnet (IPv6 does not have Subnet).
MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name Displays the name of the Host, Model, or User String for the system.
Number Displays the Asset tag or the Service tag for the system.
Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in the
Set home submenu of the Setup menu.
Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured in
the Set home submenu of the Setup menu.

Locating the Service Tag of your system

You can identify your system using the unique Express Service Code and Service Tag. Pull out the information tag in front of
the system to view the Express Service Code and Service Tag. Alternatively, the information may be on a sticker on the chassis
of the system. The mini Enterprise Service Tag (EST) is found on the back of the system. Dell uses this information to route
support calls to the appropriate personnel.
Figure 16. Locating Service Tag of your system
1. information tag (front view)
3. OpenManage Mobile (OMM) label
5. Service Tag
24 Dell EMC PowerEdge R540 overview
qrl.dell.com > Look Up > Error Code, type the error code, and then click Look it up.
2. information tag (back view)
4. iDRAC MAC address and iDRAC secure password label