Table of Contents
Advertisement
Table 6. iDRAC Quick Sync 2 indicators and descriptions (continued)
iDRAC Quick Sync 2 indicator
code
Solid amber
Blinking amber
Right control panel view
Figure 7. Right control panel
Table 7. Right control panel
Item
Indicator, button, or connector
1
Power button
USB port
2
iDRAC Direct (Micro-AB USB)
3
iDRAC Direct (Micro-AB USB) LED
4
VGA port
5
Condition
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Icon
N/A
Corrective action
Restart the system. If the problem persists, see
the
Getting help
section.
Restart the system. If the problem persists, see
the
Getting help
section.
Description
Indicates if the system is powered on or off.
Press the power button to manually power
on or off the system.
NOTE:
Press the power button to
gracefully shut down an ACPI-compliant
operating system.
The USB ports are 4-pin, 2.0-compliant.
These ports enable you to connect USB
devices to the system.
The iDRAC Direct (Micro-AB USB) port
enables you to access the iDRAC Direct
(Micro-AB) features. For more information,
see Integrated Dell Remote Access
Controller User's Guide at
poweredgemanuals.
The iDRAC Direct (Micro-AB USB) LED
indicator lights up to indicate that the
iDRAC Direct port is connected. For
more information, see the Integrated Dell
Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
Enables you to connect a display device
to the system. For more information, see
the PowerEdge R540 Technical Specs at
www.dell.com/poweredgemanuals.
Dell EMC PowerEdge R540 overview
www.dell.com/
13
Advertisement
Table of Contents
