Figure 95. Installing LOM riser card
Next steps
1. If removed,
install the
2. If removed,
install the rear drive
3. Follow the procedure listed in
Drive backplane
Backplane details
Depending on your system configuration, the drive backplanes supported in PowerEdge R540 are listed here:
Table 29. Supported backplane options for PowerEdge R540 systems
System
PowerEdge R540
102
Installing and removing system components
risers.
cage.
After working inside your
system.
Supported hard drives options
3.5 inch (x8) SAS, SATA backplane
3.5 inch (x12) SAS or SATA backplane and 3.5 inch (x2) SAS
or SATA backplane (rear)