Table of Contents
Advertisement
Display Settings
Utility > Display
X-Series signal generators are shipped from the factory with default display settings. Automated
Test Environment (ATE) users may benefit from display settings other than the default settings.
When the signal generator display is not required to be active for long periods of time, consider
using the Screen Saver Mode to extend the life of the display.
With the brightness set to minimum, the display may be too dark to see the softkeys. If this
happens, use the figure above to locate the brightness softkey and adjust the value so that you
can see the display.
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
Using Secure Display (Option
See also,
Range: 0 to 100
Light Only: turns the display light off, leaving the text visible at a low intensity.
Light & Text: turns the display light and the text off.
If the display remains unchanged for long periods of time, use this mode to
prevent the text from burning the display.
Range: 1 to 12 hours, in 1 hour increments
When on, commands executed through
the remote control bus update the signal
generator display accordingly.
page 460
Preferences & Enabling Options
User Preferences
006) on page 460.
Dark text on a light
background.
Light text on a dark
background.
Bright without color
For details on each key, use key help
page 60
as described on
.
45
Advertisement
Table of Contents
