Table of Contents
Advertisement
File Softkeys
Display internal or USB
files, depending on the
selected storage media.
Deletions require
confirmation.
page 459
Shows the current directory
When you connect USB media to the instrument, the signal generator displays the USB Media menu and the message External USB Storage attached. When you
disconnect the USB media, the message External USB Storage detached displays. When you open the External Media menu without USB media connected, the
signal generator displays the message External Media Not Detected.
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
Note: Available file types depend on the installed options.
page 87
The display indicates when the current directory is the default storage path.
For information on setting the default storage path, see
For details on each key, use key help as described on
page 82
Instrument operating parameters (see
Sweep data from the List Mode Values table editor.
User flatness calibration corrections.
Available only with USB connected
(i.e. Without external USB connected,
softkeys are greyed out).
page 87
.
This key changes, depending on
the selected file. See
page 82
Available only when the
current directory is not the
top level directory.
Requires
confirmation
page 82
Basic Operation
Working with Files
page 60
.
).
page 78
Displays IQ Files
Displays FSK
Files
Displays FIR
Files
Displays a list of
Pulse Train files.
Displays Bit
Files
The signal generator does not
format USB media or change file
permissions. Use a computer to
perform these operations.
77
Advertisement
Table of Contents
