Example Of Setting All Ils Glide Slope Parameters - Keysight N5166B CXG User Manual

Avionics VOR/ILS (Option N5180302B)
Using ILS Glide Slope Softkeys
ILS Glide Slope Menu
ILS GS Mode
Carrier Freq Index
Up/Down menu
DDM/SDM menu
COM/ID menu

Example of Setting All ILS Glide Slope Parameters

1. Press Preset to place the signal generator in a known preset state.
2. Set the ILS Glide Slope carrier frequency.
a.Press Aux Fctn > Avionics > ILS Glide Slope
b.Press Carrier Freq Index
(Default value is 1 and corresponds to 334.70 MHz.)
c.(Optional) Select a <value> from 1 to 40 and press Enter to change to a different carrier
frequency.)
3. Set the ILS Glide Slope up frequency.
a.Press Up/Down
b.Press Up Frequency
(Default value is 90 Hz.)
c.(Optional) Select a <value> from 0 Hz to 6 MHz.
4. Set the ILS Glide Slope down frequency.
a.Press Down Frequency
(Default value is 150 Hz.)
b.(Optional) Select a <value> from 0 Hz to 10 MHz.
170
a
a. For information on the COM/ID menu,
refer to "Using COM/ID Softkeys" on page
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
Parameters
1
Up Frequency
Down Frequency
Up/Down Phase
Fly Up/Down
DDM
DDM uA
DDM%
SDM
144.
Default State
OFF
334.70 MHz
90 Hz
150 Hz
0.00 deg
Up
0.0000
0.0 uA
0.00%
80.0%