Table of Contents
Advertisement
Signal Generator Overview
Front Panel Overview
17. Q Input (vector models only)
Connector
Type: female BNC Impedance: 50 Ω
Signal
An externally supplied analog, quadrature–phase component of I/Q modulation.
The signal level is
Damage Levels
1 V
rms
See also,
"I/Q Modulation" on page
18. Knob
Rotating the knob increases or decreases a numeric value, or moves the highlight to the next digit,
character, or item in a list. See also,
19. Incr Set
This hardkey enables you to set the increment value of the currently active function. The increment
value also affects how much each turn of the knob changes an active function's value, according to
the knob's current ratio setting (see
20. Return
This hardkey enables you to retrace key presses. In a menu with more than one level, the Return key
returns to the prior menu page.
21. More and LED
When a menu contains more softkey labels than can be displayed, the More LED lights and a More
message displays below the labels. To display the next group of labels, press the More hardkey.
22. Power Switch and LEDs
This switch selects the standby mode or the power on mode. In the standby position, the yellow
LED lights and all signal generator functions deactivate. The signal generator remains connected to
the line power, and some power is consumed by some internal circuits. In the on position, the green
LED lights and the signal generator functions activate.
26
= 0.5 V
for a calibrated output level.
rms
265.
"Front Panel Knob Resolution" on page
"Front Panel Knob Resolution" on page
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
46.
46).
Advertisement
Table of Contents
