The Basic Procedure - Keysight N5166B CXG User Manual

The Basic Procedure

1. Preset the signal generator.
2. Set the carrier (RF) frequency.
3. Set the RF amplitude.
4. Configure the modulation:
a.Set the pulse source: Press Pulse > Pulse Source > selection
b.Set the parameters for the selected pulse source:
Square Free Run
(default)
Pulse
⎯
Rate
⎯ Pulse
Period
⎯ Pulse
Delay
Pulse
⎯
Width
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
a. Requires Option N5180320B.
b. Up to 2047 pulse cycles (elements) composed of both Pulse On and Pulse Off can be user
defined.
5. Turn on the modulation: Pulse Off On softkey to On.
The the PULSE annunciator lights, indicating that you enabled modulation.
6. Output the modulated signal from the signal generator: Press the front panel RF On Off key.
The RF output LED lights, indicating that the signal is transmitting from the RF output connector.
See also, "Modulating the Carrier Signal" on page
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
Triggered Adjustable Doublet
⎯ ⎯
⎯ ⎯
Pulse Pulse Delay
Delay
Pulse Pulse Width
Width
Pulse 2 Delay
⎯
Pulse 2 Width
⎯
⎯ ⎯
⎯ ⎯
Pulse Modulation (Options UNW and N5180320B)
Trigger Doublet Gated
⎯
⎯ Pulse
Period
Pulse Delay
Pulse Width Pulse
Width
⎯
⎯
⎯
⎯
74.
The Basic Procedure
Pulse External
a
Train
⎯ ⎯ ⎯
⎯ ⎯
⎯ Pulse ⎯
Delay
⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯
b
Pulse On
⎯ Pulse Off b ⎯
193