6
Analog Modulation (Option UNT)
Before using this information, you should be familiar with the basic operation of the signal
generator. If you are not comfortable with functions such as setting the power level and frequency,
refer to
Chapter 3, "Basic Operation", on page 59
that chapter.
—
Using an Internal Modulation Source
—
Using an External Modulation Source
—
Removing an External Source DC Offset
—
Using Wideband AM
—
Configuring the LF Output (Option 303)
on page 182
on page 183
on page 183
on page 184
on page 185
X-Series Signal Generators
and familiarize yourself with the information in
179
Keysight Technologies
User's Guide