Avionics VOR/ILS (Option N5180302B)
Using ILS Marker Beacon Softkeys
2. Press Marker Beacon
3. Press Middle
4. Press Marker Freq
(Default value is 1300 Hz.)
5. Select a value in Hz | kHz | MHz | GHz from 0 Hz to 10 MHz.
To set the ILS Marker Beacon outer marker frequency
This process sets the frequency for the Outer Marker Beacon.
1. Press Aux Fctn > Avionics > Marker Beacon
2. Press Marker Beacon
3. Press Outer
4. Press Marker Freq
(Default value is 400 Hz.)
5. Select a value in Hz | kHz | MHz | GHz from 0 Hz to 10 MHz.
To set or return the ILS Marker Beacon parameters to a default state
This process returns the ILS Marker Beacon parameters to a set of default state conditions.
1. Press Aux Fctn > Avionics > Marker Beacon
2. Press More 1 of 2
3. Press Recall Default Settings
ILS Marker Beacon Menu
Marker Beacon mode
Carrier Freq Index
Marker Freq
Marker Depth
a
COM/ID menu
a. For information on the COM/ID menu,
refer to
"Using COM/ID Softkeys" on page
176
Parameters
17
400 Hz
95.0%
144.
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
Default State
Off
75.0 MHz
Outer
Up