KANE LINK WIRELESS MEASUREMENT AND DATA
TRANSFER
You can wirelessly connect optional KANE LINK devices to your
analyser.
Rotate dial to KANE LINK on your analyser to manage how your
analyser communicates with wireless devices.
To wirelessly transfer data to a connected smart device running our
KANE Apps, select APP using
To ADD, REMOVE and check STATUS of optional KANE LINK devices
select LINK using &
WPCP2 WIRELESS PIPE CLAMP
To add select it then enter its serial number using &
Enter its serial number using &
must be 10 digits long.
If longer use the last 10 digits. e.g. in this example only enter last 10
digits: 2105094301
DTHA2 ANEMOMETER
To add a DTHA2 anemometer select DTHA2 using &
Enter its serial number using &
be 10 digits long
If shorter enter 0's to make up to 10. e.g. in this example enter 2001228
as 0002001228.
Other KANE LINK devices can be paired – Contact KANE for more details.
.
buttons.
buttons. Each clamp serial number
buttons. Each serial number must
buttons.
buttons.
KANE 458s MANUAL
29