Make sure you do not exceed analyser operating specifications. In
particular:
•
Do not exceed flue probe max temperature - typically (600°C
•
Do not exceed analyser internal temperature operating range
•
Do not put analyser on hot surfaces
•
Do not exceed analyser water trap max level
•
Do not let analyser particle filter become dirty and blocked
View displayed data to ensure stable operating conditions are achieved
and readings are within expected range.
SENDING OR STORING TEST REPORTS
Press and release
or your App using
USING YOUR KANE INFRARED PRINTER
Switch on your printer and make ready to accept data with its infrared
receiver in line with your analyser emitter on top of the analyser – allow a
15cm gap between analyser and printer.
CO SENSOR PROTECTION PUMP
Your analyser CO sensor is automatically protected from high levels of
CO - When it measures CO above 2000ppm the main pump stops and
the CO purge pump starts.
Your analyser displays P-OFF until CO levels fall below 2000ppm.
AUX SCREEN
button, then select your optional KANE IRP printer
or
then
.
Line 1
Line 2
Line 3
Line 4
Line 5
KANE 458s MANUAL
17